205 Ceramic HT Fluid - high build solvent free epoxy novolac coating for high temperature immersion (130C)

The coating once fully cured is capable of withstanding temperatures up to 130C (265F) in continuous immersion in water, salt water and crude oil​​
  • Applied by brush or roller
  • Applied in a single coat 700-900 microns wet film thickness
  • Suitable for all metallic surfaces
  • No shrinkage
  • 130C continuous immersion resistance
  • ​High abrasion resistance​

Application Focus

Sea water process vessels on BW offshore FPSO operating at 70-90C. All surfaces were abraded using MBX bristle blasters and coated with 700-900 microns of 205 Ceramic HT Fluid
​
Process vessel operating at 90C had become badly corroded. All surfaces were abrasive blast cleaned, any badly pitted areas were rebuilt using 201 Ceramic Repair Paste. Once cured all surfaces were coated with 700-900 microns of 205 Ceramic HT Fluid
​The product can be used to line and resurface -
  • Chemical storage tanks
  • Process vessels
  • Heat exchangers
  • Sea water filters
  • Internal pipe line surfaces
  • Pumps
  • Valves

Technical Documents

Related Products

Brush grade epoxy novolac coating
Acid immersion up to 110C

Spray grade epoxy novolac coating
Chemical immersion up to 90C

Solvent free epoxy novolac abrasion resistant coating
Full concentration chemicals up to 90C immersion

Single component epoxy novolac coating
Heat activated corrosion protection coating 100-240C

Applications

    Got a Question? Email us for a quick answer
#zbwid-43d85714