501 CRSG - high build solvent free epoxy base coat for mechanically or abrasive blast cleaned surfaces 

501 CRSG  has been designed for use on a wide range of substrates including concrete, GRP and steel. The unique blend of amine curatives enables the product to bond to mechanically  prepared surfaces even at temperatures as low as 5C​
  • Applied in 2 coats at 250-300 microns per coat
  • Suitable for all metallic surfaces
  • Apply to primed concrete surfaces
  • 10,000hrs corrosion resistance
  • Apply by roller or standard airless spray
  • Tolerant of less than ideal surface preparation

Application Focus

Pipeline on a UK refinery site suffering from corrosion under insulation. Surfaces were abraded and then coated with Resichem 501 CRSG
​
Dockland Light Railway bridge was refurbished using Resichem 501 CRSG. All surfaces were abrasive blast cleaned and 2 x coats of Resichem 501CRSG were applied. The material is supplied in 2 colours to assist with over coating.
​
Footbridge suffering from corrosion was mechanically abraded using handheld grinders. 1 x coat of Resichem 501 CRSG was used as the base coat, applied at 300 microns wet film thickness. Once cured a top coat of Resichem 508 UVPU was applied to give a UV stable finish.


The product can be used to protect -
  • Chemical storage tanks
  • Structural steel
  • External pipe line surfaces
  • ​Concrete structures
  • Road & rail bridges
  • ​Railings & barriers
​

Technical Documents

Related Products

Solvent based thin film epoxy coating
Base coat - manual or mechanical cleaned steel surfaces

Solvent based UV stable polyurethane top coat
Top coat - compatible with 501CRSG or 506 Aluprime

Solvent based single pack rubberized UV stable acrylic
Top coat - cold cure capability down to 5C

Water based single pack UV stable acrylic
Flexible membrane for hydroblasted steel surfaces

Solvent free single pack epoxy novolac - heat activated
Apply to surfaces 100C to 240C

Applications

    Got a Question? Email us for a quick answer
#zbwid-43d85714