501 Series - high build solvent free epoxy coatings for mechanically or abrasive blast cleaned surfaces
The 501 series of coatings have been designed for use on a wide range of substrates including concrete, GRP and steel. The unique blend of amine curatives enable the products to bond to mechanically prepared surfaces even at temperatures as low as 5C
Pipeline on a UK refinery site suffering from corrosion under insulation. Surfaces were abraded and then coated with Resichem 501 CRSG
Dockland Light Railway bridge was refurbished using Resichem 501 CRSG. All surfaces were abrasive blast cleaned and 2 x coats of Resichem 501CRSG were applied. The material is supplied in 2 colours to assist with over coating.
Footbridge suffering from corrosion was mechanically abraded using handheld grinders. 1 x coat of Resichem 501 CRSG was used as the base coat, applied at 300 microns wet film thickness. Once cured a top coat of Resichem 508 UVPU was applied to give a UV stable finish.
The product can be used to protect -
501 CRXL Technical Documents
High build solvent free epoxy coating that can be applied by brush, roller or standard airless spray
501 CRSG Technical Documents
High build solvent free epoxy coating that can be applied by brush, roller to surfaces with less than ideal preparation