530 HA100 - single component epoxy novolac for application to hot process surfaces 100C to 200C 

This innovative  coating is activated at temperatures above 100C and can resist highly corrosive environments up to 200C.  530 HA100 is ideal for the protection of surfaces where CUI is prevalent.​
  • Applied in 2 coats at 250-300 microns per coat
  • Innovative curing system
  • Apply at temperatures ranging from 100C to 200C
  • Independently tested by Oil and Gas major
  • Apply by standard airless spray
  • High bond strength to metals, polyethylene & polypropylene​

Application Focus

Process pipes at a Croatian Refinery coated with Resichem 530 HA100. The surface temperature was measured at 180C when the coating was applied
​
Process line pipes coated with 2 coats of Resichem 530 HA100 at 250 microns per coat. Pipes were heated to 150C, HA100 cured within 7-10 minutes
​
Pipe nozzle on storage tank operating at 120C was coated in-situ to prevent any further corrosion on the surface of the metallic substrate
​

​The product can be used to protect -
  • Chemical storage tanks
  • External pipe line surfaces
  • ​External surfaces of process vessels​


​

Technical Documents

Related Products

Solvent free high build epoxy coating  
Base coat - mechanical or blast cleaned steel surfaces

Solvent based thin film epoxy coating
Base coat - manual or mechanical cleaned steel surfaces

Solvent based UV stable polyurethane top coat
Top coat - compatible with 501CRSG or 506 Aluprime

Solvent based single pack rubberized UV stable acrylic
Top coat - cold cure capability down to 5C

Water based single pack UV stable acrylic
Flexible membrane for hydroblasted steel surfaces

Applications

    Got a Question? Email us for a quick answer
#zbwid-43d85714